Camera Notes

Settings and limitations that differ between camera makes

Most cameras work the same way in the app. This page lists what is different for each camera make: settings needed on the camera, settings the app changes or adds, and features that aren’t available. For Live View features, see Camera Support.

Canon

  • Storage – Storage offers Disk, Card, Both and JPEG. On a camera with two card slots, Both saves to the slot selected on the camera. If there is no memory card in the camera, Storage stays at Disk. While the camera records video, Storage is switched to Card until recording stops.

  • Self-timer and bulb – While the shutter speed or mode dial is set to Bulb, a 2 or 10 second self-timer drive mode is switched to single frame. The original drive mode is put back when the camera is no longer set to Bulb.

  • Not supported – Power zoom. Bulb exposures, video recording, and reading or setting the camera’s clock are only available on some models.

Fujifilm

  • Control Mode – Fujifilm cameras have a Control Mode setting in the Camera Controls window, set to Camera or App. The app sets it to Camera when the camera connects, and back to Camera when it disconnects. The app can take photos and use Live View in both modes: in Camera mode it takes control of the camera just for the shot, or while Live View is on, and then hands it back. The differences are:

    • The camera settings can only be changed from the app in App mode, and not while Live View is on.

    • Auto Focus and the Live View focus buttons only work in App mode (see Fujifilm).

  • Exposure settings – Except in manual exposure mode, only the setting that the exposure mode leaves free can be changed: Aperture in A mode, and Shutter Speed in S mode.

  • Release priority – The first time the app takes control of the camera, it sets the camera’s AF-S and AF-C RELEASE/FOCUS PRIORITY settings to RELEASE, so that the camera doesn’t refuse a shot from the app when it judges the scene out of focus. The original settings are put back when the camera is disconnected in the app, but not if the USB cable is unplugged first.

  • Storage – Only Disk and Both are available. If there is no memory card in the camera, Storage stays at Disk. On some models Storage is fixed at Disk.

  • Not supported – Bulb exposures, video recording and power zoom. Reading or setting the camera’s clock is only available on some models.

Nikon

  • Connecting – When a Nikon camera connects, any photos still waiting in the camera’s memory buffer, and not yet saved to the memory card, are discarded.

  • Storage – Storage offers Disk, Card, Both and JPEG. If there is no memory card in the camera, Storage stays at Disk. While the camera records video, Storage is switched to Card until recording stops.

  • Live View – On some models, turning Live View on sets Storage to Disk and stops it being changed until Live View is turned off. Storage then stays at Disk until you change it.

  • Not supported – Power zoom. Bulb exposures, video recording, and reading or setting the camera’s clock are only available on some models.

Ricoh

These notes apply to the Ricoh Theta S.

  • Storage – The camera always saves photos to its own memory, and Storage only decides what the app does with them:

    • Disk – The photo is downloaded, and then deleted from the camera.

    • Both – The photo is downloaded, and kept on the camera.

    • JPEG – Only JPEG photos are downloaded, and kept on the camera.

    • Card – The photo is not downloaded.

  • Not supported – Live View, Auto Focus, bulb exposures, video recording and power zoom.

Sigma

These notes apply to the Sigma fp and fp L.

  • Control Mode – The Camera Controls window has a Control Mode setting, set to App or Camera. It starts as App, where the app takes photos, focuses and changes the camera settings. In Camera mode you take photos with the camera’s own shutter button and the app downloads them, but the app can’t take photos or focus, and the camera settings can’t be changed from the app.

  • Storage – Only two Storage values are available:

    • Disk – The photo is downloaded and saved to the local computer disk, and not saved to the camera’s memory card.

    • Buffer – The photo is held on the camera and not downloaded yet, so that a batch of photos can be shot first. When Storage is set back to Disk, the photos held on the camera are downloaded, in the order they were taken.

    Card and Both aren’t offered, because the camera would overwrite photos already on its memory card with the new ones. When a Sigma camera connects, the app sets it to save photos to the computer, and Storage starts as Disk whatever the Camera Storage default is (see Setting a default). Photos held with Buffer are discarded if the camera is disconnected before Storage is set back to Disk, and Identify and Reshoot don’t work while Storage is Buffer.

  • Not supported – Bulb exposures, video recording, and formatting the memory card or deleting photos from it. The camera’s clock can be set from the app, but not read. In Live View, zoom isn’t available and the AF area can’t be moved (see Sigma).

  • Fast bursts – During fast continuous shooting the camera can occasionally stop taking photos, and the app then shows an error for the camera. Unplug the USB cable and plug it back in to recover. Disconnecting and reconnecting in the app is not enough.

Sony

The Sony UMC-R10C works differently from the other Sony models, and is covered separately at the end.

  • Connecting – The camera’s USB connection must be set to PC Remote.

  • Storage – Storage offers Disk, Card and Both, but not JPEG. On some older models the app can’t change where photos are saved, so Storage is fixed at Disk.

  • Not supported – Bulb exposures and video recording. On some models the camera’s clock can’t be read or set from the app.

  • UMC-R10C – Storage offers Disk and Card. Bulb exposures (with the shutter speed set to Bulb), video recording and power zoom are available. Connecting can take a few seconds longer than for other cameras.